large slack of line and subscriber cables;
no need to measure cables for installation;
removable insert enabling splicing up to 4m from the post;
does not require cable wells;
housing made of thermosetting polyester reinforced with glass fiber in the technology of electrical housings;
online customer splicing;
galvanized insert;
separate linear zone locked with a key;
high fiber aggregation;
optional: door covered with varnish resistant to UV radiation;
possibility to extend the insert and increase the number of connections.
Use:
outdoor FTTH network main distribution point;
underground fiber optic networks.
Additional technical parameters:
maximum number of customer-side distribution plates in the SC connector standard: 144
maximum number of line-side distribution plates in the SC connector standard: 16
color: Gray
weight [kg]: 12
subscriber cable diameter [mm]: up to 7mm
bus cable diameter [mm]: up to 12mm
max. number of splitters in the ABS housing: 10 pcs
max. number of Neptun 24J splice trays: 7
max. number of ARC 12J splice trays: 14
max. cable slack in the cable pocket: 100m
mid-span splicing option: YES
max. number of subscriber cables after expansion: 36 pcs
max. number of line cables after expansion: 9 pcs
max. number of splices after expansion: 336 pcs
Equipment included:
8 x ARC splice trays for 12 splices (+ 5 extra trays on insert);
2 x ARC tray holder;
153x SCA adapters;
12x 12 telcordia pigtails;
9 x sca pigtails;
Jupiter insert;
housing made of thermosetting polyester reinforced with fiberglass;
2x rubber cable gland
cable ties;
necessary bolts and mounting tapes;
system lock with key.
